R.D.S. Technology

What is R.D.S. Technology

R.D.S. TechnologyR.D.S. is a patented sight in tape system that eliminates the need for multiple pins or crosshairs to shoot various distances with a vertical bow, crossbow or firearm. It allows you to focus on a single dot or reticule, dial to the distance of the target and shoot. The clutter and confusion of 3, 5 and 7 pins on a bow or 5 or 6 lines in a scope are removed and replaced with one aiming point. This results in increased accuracy and higher confidence in the field and on the range.

How it Works

For years, archers with a single pin sight were forced to manually sight in with a blank piece of tape and a pen or pencil. Though effective, the process was tedious and time consuming. By applying some basic mathematics, we discovered a faster, more precise method of calibration and introduced the EZ-TAPE system to our Optimizer Lite bow sight several years ago. It was then applied to the Ultra Series and Speed Dial for the crossbow and finally the Horizon for firearms.

 

How R.D.S. Technology Works on Your Bow

Step 1
Step 1
Set up tape lands on #12 for 20 Yds.
Step 2
Step 2
Set up tape lands on #46 for 60 Yds.
Step 3
Step 3
Select tape #34 (46-12=34) from the tape kit and apply to the dial.
Step 4
Step 3
You are now sighted in from 20 to 80 yards in 1 yard increments with your bow!

Watch Setup Video

 

How R.D.S. Technology Works on Your Crossbow

Step 1
Step 1
With set up tape set at "0," sight in at 20 yards with the turrets on your scope.
Step 2
Step 2
Replace turret caps and sight in at 60 yards by rotating the dial (#48 in this example).
Step 3
Step 3
Select tape #48 from the tape kit and apply to the dial.
Step 4
Step 3
You are now sighted in from 20 to 80 yardes in 1 yard increments with your crossbow!

Watch Setup Video

 

How R.D.S. Technology Works on Your Gun

Step 1
Step 1
With MOA Wheel set a "0", sight in at 50 yards with the turrets on your scope.
Step 2
Step 2
Replace turret caps and sight in at 200 yards by rotating the MOA wheel (#91 in this example).
Step 3
Step 3
Select tape #91 from the 200 yard tape kit and apply to the yardage wheel.
Step 4
Step 3
Remove MOA wheel and replace with #91 yardage wheel. You are now sighted in from 50 to 200 yards in 5 yard increments with your .22!

Watch Setup Video

loaded in 4.0116ms | 11/24/2017 8:38:00 AM